Shin-Etsu Silicones : LIMS (Liquid silicone rubber Injection Molding System)

Home > By Product type > LIMS (Liquid silicone rubber Injection Molding System)

Silicone fluids
Silicone fluids Modified silicone fluids Greases and fluid compounds Textile treatments Release agents Silicone release coatings Defoaming agents Foam stabilizers Pressure sensitive adhesives

Silicone resins
Silicone resins Paint additives

Powders
Silicone Powder

Silanes
Silanes Silane coupling agents

RTV rubbers
One-component RTV rubbers Two-component RTV rubbers (for electric and electronic applications) Two-component RTV rubbers (for moldmaking) Sealants (for construction) Construction coating agents

Rubbers
Rubber compounds LIMS (Liquid silicone rubber Injection Molding System) Heat-shrinkable silicone rubber tubing Heat-dissipating rubber products Electrically conductive rubber products

LIMS (Liquid silicone rubber Injection Molding System)

The name “LIMS” describes a molding system in which liquid silicone rubber is used in high-precision injection molding machines. All steps are automated, from mixing to molding. This system saves labor and time, and makes it easy to produce high-quality molded items.

Features

	Saves time
	Addition-cure liquid silicone is used, so cure speed is fast and molding time can be reduced.
	Increased productivity
	The materials are liquids, so molding can be done at low injection pressures. The system is also suitable for molding of high-precision components.

	Automation of the molding process
	Suitable for flashless, runnerless molding. And because molded items release easily from the mold after curing, the molding process can be automated.
	Environmentally friendly
	There are no byproducts generated during curing. With flashless and runnerless molding, there is no need to process waste material, meaning a more environmentally friendly manufacturing process.

Products

Application	Grade	Features
Fast cure Transparent High strength	KEG-2000-40(A/B)	Flashless, runnerless molding. Continuous automated molding with short cycle times is also possible.
	KEG-2000-50(A/B)
	KEG-2000-60(A/B)
	KEG-2000-70(A/B)
	KEG-2001-40(A/B)
	KEG-2001-50(A/B)
Transparent High strength	KE-1950-10(A/B)	They are highly safe and meet the standards of Japan's Food Sanitation Law. Before using, be sure to determine whether these materials comply with comparable laws in your country.
	KE-1950-20(A/B)
	KE-1950-30(A/B)
	KE-1950-35(A/B)
	KE-1950-40(A/B)
	KE-1950-50(A/B)
	KE-1950-60(A/B)
	KE-1950-70(A/B)
High transparency	KE-1935(A/B)	High transparency.
	KE-1987(A/B)
	KE-1988(A/B)
Oil bleed	KE-2014-30(A/B)	Oil bleed, high strength and low specific gravities.
	KE-2014-40(A/B)
	KE-2014-50(A/B)
	KE-2014-60(A/B)

Selective Self-adhesives

LIMS Selective Self-adhesives adhere to resins without sticking to the mold, so they allow integrated molding through automation.

Application	Grade	Features
Co-injection molding and Insert molding	KE-2090-40(A/B)	For PC and PBT resins.
	KE-2090-50(A/B)
	KE-2090-60(A/B)
	KE-2030-70(A/B)
	X-34-1625(A/B)	For PA resin.

Catalogs

Contact


Back	Top