Shin-Etsu Silicones : Silicone release coatings

Home > By Product type > Silicone release coatings

Silicone fluids
Silicone fluids Modified silicone fluids Greases and fluid compounds Textile treatments Release agents Silicone release coatings Defoaming agents Foam stabilizers Pressure sensitive adhesives

Silicone resins
Silicone resins Paint additives

Powders
Silicone Powder

Silanes
Silanes Silane coupling agents

RTV rubbers
One-component RTV rubbers Two-component RTV rubbers (for electric and electronic applications) Two-component RTV rubbers (for moldmaking) Sealants (for construction) Construction coating agents

Rubbers
Rubber compounds LIMS (Liquid silicone rubber Injection Molding System) Heat-shrinkable silicone rubber tubing Heat-dissipating rubber products Electrically conductive rubber products

Silicone releasing agents are also used in the production of release paper. They are used in a wide range of applications in everything from adhesive tapes, films, emblems and labels, to the packaging paper of latex and synthetic rubbers.

Features

	Thin film coatings
	These agents cure to form thin film coatings via chemical reaction.
	Heat-cure, UV-cure, and EB (Electron Beam)-cure
	Releasability

	Heat and cold resistance
	Adhesion to substrates

Products

Applications	Grade	Features
General purpose	KS-776A	The most standard type is suitable for tapes, but is also commonly used for labels.
	KS-839L	Little time-dependence of release properties.
	KS-847T	Easy release with acrylic solvent adhesives. High time-dependence of release properties.
Light-release applications	KS-779H	Easiest release of all easy-release products.
	KS-837	Easy release with PE laminate paper. Good slickness.
	KS-778	Particularly good curability and pot life. The standard easy-release product.
Heavy-release applications	KS-830	Tighter release than KS-776A, and no tape curling. Suitable for tapes.
Heavy-release applications	KS-3502	Tighter release than KS-776A. Not slick, and can be used to glue multiple layers.
Paintable applications	KS-723A/B	Has paintability not found in conventional release paper silicones.
Release-control applications	KS-3800	Cannot be used alone, but is highly effective for release-control.
For film	KS-774	Good adhesion to aluminum foil, and to OPP, PET and PE films. Good residual adhesion. The standard product for film applications.
For film	KS-3703	This type has greater curability and adhesion than KS-774.
Concentrated coating applications	KS-835	Low-viscosity version of KS-778.
Concentrated coating applications	KS-847	Low-viscosity version of KS-847T. Improved resistance to exposure. Superior curability.
Emulsion type, general purpose	KM-3951	Easy-release applications. Suitable for common labels.
	KM-768	Medium-release applications. Suitable for tapes.
	X-52-170	Easy-release applications. Suitable for common labels. Particularly good low-speed releasability.
	X-52-179	Good residual adhesion.
Non-solvent type, general purpose	KNS-3051	Easy release, for PE laminates.
	KNS-303	Good Slickness. Suitable for craft PE laminate paper.
	KNS-320A	Easy-release applications. Suitable for common tapes and labels.
	KNS-316	Medium-release applications. Suitable for common tapes and labels.
	KNS-3002	Tight-release applications. Little time-dependence.
	KNS-3300	Tight-release applications. Release-control agent.
Non-solvent type, UV-cure applications	X-62-7622	Exposure to UV light yields a release paper with easy release and good residual adhesion.
	X-62-7052	Catalyst unnecessary. One-component type, partial coating is possible, mercapto-modified.
	KF-2005	Catalyst necessary. Fast curing. Acrylic type. Nitrogen gas required.
UV-cure film applications	KS-5508	Medium-release applications. Suitable for substrates with low heat-resistance.

Catalogs

Contact


Back	Top