By Product type

Two-component liquid rubbersfor moldmaking

Two-component liquid silicone rubber compounds for moldmaking are suitable for mold masters for molding with polyester resin, epoxy resin, urethane foam, wax, plaster, and low-melt-point metal alloys. These liquid silicone rubber compounds allow accurate reproduction of the shape of the original. They are easy to use and are thus used widely in industrial applications, as well as by hobbyists looking to create the perfect replica.

Features

Workability

The base compound and curing agent are mixed and then poured into the mold to create a silicone rubber mold quickly. Workable time and cure time can be adjusted.

Mold-releasability

The cured rubber releases easily from the mold, so mold-release agents (soapy water, wax, etc.) are unnecessary.

Dimensional stability

These rubbers offer good dimensional stability, with little shrinkage.

Flowability

They have excellent flowability, so the original form is reproduced accurately. This includes even intricate shapes and details such as fingerprints and wood grain.

Non-exothermic

No heat is generated during curing, meaning no adverse effects to the original.

Typical Products

Application Grade Curing
method
Before curing Appearance Features
General purpose KE-12 Condensation White Good working properties
KE-14 Condensation Grayish white Good working properties
KE-17 Condensation Grayish white Good working properties
For welder molding KE-24 Condensation Grayish white High hatrdness
KE-26 Condensation Grayish white High hatrdness
High-strength condensation-cure type KE-1414 Condensation Grayish white Curing agent for skin-molding available
KE-1415 Condensation Grayish white Hardness: 20
KE-1416 Condensation Grayish white Hardness: 15
KE-1417 Condensation Grayish white Improves urethane resistance. Hardness: 30
Grayish white Improves urethane resistance. Hardness: 40
High-strength addition-cure type KE-1300T Addition Translucent  
KE-1310ST Addition Translucent Improves urethane resistance
KE1314-2 Addition Translucent Oil bleed
KE-1316 Addition Translucent Low viscosity, low hardness
KE-1600 Addition Grayish white High hardness
KE-1603-A/B Addition Transparent High transparency, Mix ratio 1:1
KE-1606 Addition Transparent High transparency, Mix ratio 10:1
Other KE-1222-A/B Addition A:Blue
B:Deep flesh tone
Fast cure, Putty type
KE-1241 Addition Grayish white For printing on curved surfaces

Silicone impression materials for high-precision moldmaking

Application Grade Curing
method
Before curing Appearance Features
For nanoimprint lithography and printing blankets SIM-260 Addition Colorless,
transparent
Standard cure type.
Standard hardness.
SIM-240 Addition Colorless,
transparent
Standard cure type.
Low hardness.
SIM-360 Addition Colorless,
transparent
Rapid cure type.
Page Top